2 000 Vous pouvez réserver des unités dès maintenant
Quantité | Prix (hors TVA) |
---|---|
100+ | 1,020 € |
250+ | 0,957 € |
500+ | 0,920 € |
1000+ | 0,891 € |
2500+ | 0,856 € |
Informations produit
Aperçu du produit
The AM26LV32EIPWR is a quadruple differential Line Receiver with 3-state outputs. This low voltage high speed receiver is designed to meet TIA/EIA-422-B and ITU recommendation V.11 drivers with reduced supply voltage. The device is optimized for balanced bus transmission at switching rates up to 32MHz. The 3-state outputs permit connection directly to a bus-organized system. The AM26LV32E has an internal fail-safe circuitry that prevents the device from putting an unknown voltage signal at the receiver outputs. In the open fail-safe, shorted fail-safe and terminated fail-safe, a high state is produced at the respective output. This device is supported for partial-power-down applications using Ioff. Ioff circuitry disables the outputs, preventing damaging current back-flow through the device when it is powered down.
- Meets or exceeds standards TIA/EIA-422-B and ITU recommendation V.11
- ESD protection for RS422 bus pins
- IOFF supports partial power-down-mode operation
- 27mW Typical low power dissipation
- Open circuit, short-circuit and terminated fail-safe
- 35mV Typical input hysteresis
- Green product and no Sb/Br
Avertissements
This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
Spécifications techniques
Récepteur de ligne
RS422
-
32Mbps
TSSOP
TSSOP
32
Ouvert
85°C
-
No SVHC (27-Jun-2018)
Récepteur RS422 / RS485
4Receivers
Half Duplex
3V
3.6V
16Broche(s)
±8 kV (Contact), ±15 kV (Air Gap), ±15 kV (HBM)
-40°C
-
-
Documents techniques (1)
Législation et Questions environnementales
Pays dans lequel la dernière étape de production majeure est intervenuePays d'origine :Malaysia
Pays dans lequel la dernière étape de production majeure est intervenue
RoHS
RoHS
Certificat de conformité du produit