X9C103SIZT1

X9C103SIZT1 is a digitally controlled potentiometer (XDCP™) in an 8 pin SOIC package. The device consists of a resistor array, wiper switches, a control section, and non-volatile memory. The wiper position is controlled by a three-wire interface. The potentiometer is implemented by a resistor array composed of 99 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by the active-low CS, U/D, and INC inputs. The position of the wiper can be stored in non-volatile memory and then be recalled upon a subsequent power-up operation. The device can be used as a three-terminal potentiometer or as a two-terminal variable resistor in a wide variety of applications ranging from control to signal processing to parameter adjustment.

• Solid-state potentiometer
• Three-wire serial interface
• 100 wiper tap points
• Endurance of 100,000 data changes per bit
• Register data retention of 100 years
• 10Kohm resistance
• Operating temperature range from -40°C to +85°C

Avertissements

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.