TJA1462BTK/S1Z

TJA1462BTK/S1Z is a CAN FD signal improvement transceiver with standby mode. It provides an interface between a Controller Area Network (CAN) or CAN FD (Flexible Data rate) protocol controller and the physical two-wire CAN bus. TJA146x transceivers implement the CAN physical layer as defined in ISO 11898-2:2016 and SAE J2284-1 to SAE J2284-5, and are fully interoperable with high-speed classical CAN and CAN FD transceivers. The TJA1462 includes CAN Signal Improvement Capability (SIC), as defined in CiA 601-4:2019. CAN signal improvement significantly reduces signal ringing in a network, allowing reliable CAN FD communication to function in larger topologies. In addition, the TJA1462 features a much tighter bit timing symmetry performance to enable CAN FD communication up to 8Mbit/s.

• Much tighter bit timing symmetry performance allowing more time to reduce signal ringing
• Low electromagnetic emission (EME) and high electromagnetic immunity (EMI)
• Qualified according to AEC-Q100 grade 1
• Normal, standby modes, VCC pin supplies
• Up to 5Mbit/s CAN FD, up to 8Mbit/s CAN FD data rate
• Signal improvement, short WUP support [0.5 to 1.8µs], TXD dominant timeout
• Supply voltage range from 4.5 to 5.5V (Tvj = -40°C to +150°C)
• Supply current is 42mA typ (dominant, VTXD = 0V, t <lt/> tto(dom)TXD, Tvj = -40 to +150°C)
• Dominant output voltage is 3.5V typ (pin CANH, RL = 50 to 65ohm, Tvj = -40 to +150°C)
• HVSON8 package, virtual junction temperature range from -40 to +150°C