MAX3483ESA+T

The MAX3483ESA+T is a 3.3V powered, slew rate limited true RS485/RS422 transceiver in 8 pin NSOIC package. The device features slew rate limited drivers that minimize EMI and reduce reflections caused by improperly terminated cables allowing error free data transmission at data rates up to 250Kbps. The driver is short circuit current limited and protected against excessive power dissipation by thermal shutdown circuitry that places the driver output into a high impedance state. The receiver input has a fail-safe feature that gives a logic high output if both inputs are open circuit.

• Supply voltage range from 3V to 3.6V
• Operating temperature range from -40°C to 85°C
• One driver and one receiver
• No charge pump
• Half duplex communication
• Driver/receiver enable function
• Allows up to 32 transceivers on the bus
• Interoperable with +5V logic
• Common mode input voltage range from -7V to +12V
• Low shutdown current of 2nA

Remarques

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party