MAX1501ZETE+

The MAX1501ZETE+ is a highly integrated, linear battery charger with thermal regulation for portable applications in 16 pin TQFN package. The MAX1501 intelligent, constant-current, constant voltage (CCCV), temperature regulated battery charger charges a single lithium-ion (Li+) cell or three-cell NiMH/NiCd batteries. The device integrates the current sense resistor, PMOS pass element and thermal regulation circuitry, while eliminating the reverse blocking Schottky diode. For single-cell Li+ batteries, the MAX1501 functions as a stand-alone charger to control the charging sequence from the prequalification state through fast charge, top off and charge termination. With 3-cell NiMH/NiCd batteries, the MAX1501 requires collaboration with a microcontroller to determine the best charging algorithm. Thermal-regulation circuitry limits the die temperature when fast charging or while exposed to high ambient temperatures, allowing maximum charging current without damaging the charger.

• Supply voltage range is 4.5V to 13V
• Operating temperature range from -40°C to 85°C
• No FET, reverse-blocking diode, or current sense resistor required
• Programmable fast-charge current is 1.4A (max)
• Input overvoltage (OVLO) protection above 6.5V
• Programmable top-off current threshold is 10%, 20%, or 30% of fast-charge current
• Charge-current monitor for fuel gauging
• Programmable safety timer (3, 4.5, or 6 hours)
• Input power detection output and charge enable input
• Automatic recharge

Remarques

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party