HMC722LP3E

HMC722LP3E is a AND/NAND/OR/NOR function designed to support data transmission rates of up to 13Gbps, and clock frequencies as high as 13GHz. The HMC772LP3E may be easily configured to provide any of the following logic functions: AND, NAND, OR, and NOR. The HMC722LP3E also features an output level control pin, VR, which allows for loss compensation or for signal level optimization. All input signals to the HMC722LP3E are terminated with 50 Ohms to ground on-chip and may be either AC or DC coupled. The differential outputs of the HMC722LP3E may be either AC or DC coupled. Outputs can be connected directly to a 50 ohm-to-ground terminated system, while DC blocking capacitors may be used if the terminating system is 50 Ohms to a non-ground DC voltage. Applications include RF ATE applications, broadband test & measurement, serial data transmission up to 13Gbps, digital logic systems up to 13GHz, NRZ-to-RZ conversion.

• Differential & single-ended operation, -3.3V single supply voltage
• Power supply current is 70mA typical at (TA = +25°C)
• Maximum clock rate is 13GHz typical at (TA = +25°C)
• Input return loss is 10dB typical at (frequency <13GHz, TA = +25°C)
• Output rise/fall time is 19/18ps typical at (differential, 20% - 80%, TA = +25°C)
• 95ps typical propagation delay td at (TA = +25°C)
• Random jitter Jr is 0.2ps rms maximum at (TA = +25°C)
• Output amplitude is 550mVp-p typical at (single-ended, peak-to-peak)
• Operating temperature range from -40°C to +85°C
• 16-lead SMT package

Remarques

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party